Technical Specifications
| Machine model | H5U | H50U | ||
| Maximum mass of workpiece | 4400 | 7500 | ||
| Maximum diameter of workpiece | Φ1600 | Φ2100 | ||
| Distance from flange face to right support center | Minimum spacing | 70mm | 200mm | |
| Maximum distance from drive flange to right support center | 2340mm | 2150mm | ||
| Shaft diameter range | Standard type | Φ18~Φ140 | Φ25~Φ180 | |
| Extended type (optional) | Φ140~Φ280 | Φ180~Φ380 | ||
| Balance speed | 230 / 390 / 685 / 1090 / 1680 with gearbox | |||
| Motor power (DC motor) | 15kW （D.C） | |||
| Universal coupling specification | Attached | 700 N·m | ||
| Optional L | 250 N·m | |||
| Maximum indication sensitivity of electric measuring box | CAB590 | 24 g·mm | 30 g·mm | |
| (balance speed > 820 R / min) | CAB690 | 8 g·mm | 10 g·mm | |
| Bed length | Standard bed | 3500mm | ||
| Optional bed | 2000/5000mm | |||
| Limit value | Support stiffness GN2kg / min2) | 700×106 | 910×106 | |
| Driving power Gd2n2(KGM2/ min2) | 355×106 | 39×106 | ||
| Minimum achievable residual unbalance emar | 1gmm/kg | |||
| Unbalance reduction rate | 90% | |||
Product Features
01
Integral H-shaped support frame, light and reliable structure, small vibration system damping and good rigidity；
02
Each accessory part adopts international and domestic well-known brand products, such as gearboxes, rolling bearings, low-voltage electrical components, etc；
03
Strict and complete quality system, complete technology, testing methods and configuration of various metal processing equipment to ensure product quality；
04
Perfect comprehensive supporting capabilities, can provide flexible and diverse options, and provide you with the most optimized product configuration；
Small ring drives the balancer workpiece
Application
This machine adopts the combination of gearbox speed change and DC motor, and drives the workpiece to rotate through universal coupling. It has the characteristics of high precision, high efficiency, simple operation, intuitive display and strong human-computer interaction ability.Before start-up, as long as the distance between the two calibration faces of the rotor, the distance between the calibration front and the support point, as well as the radius of the calibration front, can correctly display the magnitude and phase of the workpiece unbalance under one start-up. It is also applicable to special rotors such as the extended end of the inner and outer center of gravity.And has a variety of specifications of universal coupling for users to choose.
