Technical Specifications
| Type | BWXST-5L-A BWXST-5L-B |
| Main compinents | Cylinder：SMC Sever motor：MITSUBISHI Sensor：KETENCEBAUMER Touch pan：KEYENCE Contrel PLC:KEYENCE |
| Rotor range | weight<1kg Rotor diameter: 50-130mm Shaft The length<200mm Shaft length:of core:30-90mm |
| Measuring speed | 1380~2100rpm |
| Balance correction method | periphery sweep mill |
| power | 3-PHASE AC380V |
| Working air pressure | 0.4~0.6MPA |
| Cycle time | 16S~25S *Depending on the workpiece, there will be differences |
| Residual volume | 80mg~300mg *Depending on the workpiece, there will be differences |
| (length*heightxdepth) Volume | 1950mmX2050mmX1455mm |
| Machine weight | 3T |
| Consumption | 3.5kw |
| Cleaner consumotion | 1.5kw |
Product Features
- High efficiency, equipment working beat R-milling 8 seconds, v-milling 10 seconds.
- The machining precision is high, the dynamic and static balance consistency is good.
- With automatic line can be connected with front and back automatic line equipment to reduce operator.
- Simple, operator through a short period of training can operate.
- Start processing, automatic loading and unloading. (with the whole line online)
- Initial measurement of the initial quantity, cut 1, cut 2 respectively on both sides, re-test to determine whether qualified.
- Machining times, cutting depth, qualified threshold can be set.
- Assembly line automatic separation of good and bad products, full material alarm, automatic shutdown.
- The touch screen is used as man-machine exchange interface, and the operation is convenient.
Application
This product is a mechatronics engineering equipment, with PLC as the main control computer, to complete the relevant calculation and action control of each station, with touch screen as the human-machine interface, to set parameters and operation of the machine
Product media
