Balancing Machine for Turbines

Balancing Machine for Turbines This machine is especially suitable for the balance detection of medium-sized motor rotor, water pump rotor, centrifuge rotor, small and medium-sized blower rotor, small and medium-sized machine tool spindle rotor, medium-sized textile machine winding rotor, etc.

Technical Specifications

Machine model		H4U	H40U	H40W
Maximum mass of workpiece		1000kg	2000kg	3000kg
Maximum diameter of workpiece		Φ1600mm		Φ2100mm
Distance between two supports	Minimum spacing	70mm
	Maximum distance from drive flange to right support center	2050mm		3050mm
Shaft diameter range	Standard type	Φ12~Φ100mm	Φ15~Φ120mm	Φ120~Φ240mm
	Extended type (optional)	Φ200mm	Φ240mm	Φ200~Φ300mm
Balance speed (universal joint drive)		600 / 1250 R / min CVT
Motor power		4kW（AC）	7.5kW（AC）
Universal coupling specification	Attached	250N·m	700N·m
	Can be added	80N·m	250N·m
Maximum indication sensitivity	CAB590	7.5g·mm	12g·mm
(when balance speed > 820r / min)	CAB690	2.5g·mm	4g·mm
Bed length	Standard bed	3000 mm		4000 mm
	Optional bed	4000 mm		2000/3000mm
Limit value	Support stiffness GN2kg / min2)	260×106
	Driving power Gd2n2(KGM2/ min2)	13×106	39×106
Minimum achievable residual unbalance emar		0.5gmm/kg
Unbalance reduction rate		95%

Product Features

01

Integral H-shaped support frame, light and reliable structure, small vibration system damping and good rigidity；

02

Each accessory part adopts international and domestic well-known brand products, such as gearboxes, rolling bearings, low-voltage electrical components, etc；

03

Strict and complete quality system, complete technology, testing methods and configuration of various metal processing equipment to ensure product quality；

04

Perfect comprehensive supporting capabilities, can provide flexible and diverse options, and provide you with the most optimized product configuration；