Technical Specifications
| Machine model | H8V | H80V | |
| Maximum mass of workpiece | 28000 kg | 40000 kg | |
| Maximum diameter of workpiece | Φ3200 mm | Φ3500 mm | |
| Workpiece shaft diameter range | Standard type | Φ60~Φ250 mm | Φ65~Φ360 mm |
| Extended type (optional) | Φ250~Φ500 mm | Φ230~Φ560 mm | |
| Distance from flange face to right support center | Minimum spacing | 330 mm | |
| Maximum distance from drive flange to right support center | 7000 mm | ||
| Balance speed (with gearbox) | 190/330/550/900/1350/1660 | ||
| Motor power (D.C) | 55 kW | 110/#132 kW | |
| Universal coupling specification | Attached | 5000 N·m | 7800 N·m |
| Matching | 2250 N·m | 2250/5000/12500 N·m | |
| Maximum indication sensitivity of electric measuring box | CAB590 | 360 g·mm | 750 g·mm |
| (balance speed > 820 R / min) | CAB690 | 120 g·mm | 250 g·mm |
| Bed length | Standard bed | 5250 mm | |
| Optional bed | 2250 mm | ||
| Limit value | Support stiffness GN2kg / min2) | 3302×106 | 4127×106 |
| Driving power Gd2n2(KGM2/ min2) | 3935×106 | 4127×106/#4045×106 | |
| Minimum achievable residual unbalance emar | 1gmm/kg | ||
| Unbalance reduction rate | 90% | ||
Product Features
01
Integral H-shaped support frame, light and reliable structure, small vibration system damping and good rigidity;
02
Each accessory part adopts international and domestic well-known brand products, such as gearboxes, rolling bearings, low-voltage electrical components, etc;
03
Strict and complete quality system, complete technology, testing methods and configuration of various metal processing equipment to ensure product quality;
04
Perfect comprehensive supporting capabilities, can provide flexible and diverse options, and provide you with the most optimized product configuration;


Small ring drives the balancer workpiece

Application
Jizhi general compressor balancing machine adopts the combination of gearbox speed change and DC motor, and drives the workpiece to rotate through universal coupling. It has the characteristics of high precision, high efficiency, simple operation, intuitive display and strong human-computer interaction ability.Before start-up, as long as the distance between the two calibration faces of the rotor, the distance between the calibration front and the support point, as well as the radius of the calibration front, can correctly display the magnitude and phase of the workpiece unbalance under one start.And has a variety of specifications of universal coupling for users to choose.


