文章

• 

  How to decide milling method for your rotor?

  Rotor milling methodsgenerally includes R Shape，V Shape，P Shape, T Shape, and drilling.   1) R Shape: Apples in power tools, household and the components of vehicle (wiper motor) profile milling. See picture of the cutter and cutting marks on rotors as below: 2) V Shape ...

  Read more
• 

  Processes with a Significant Impact on the Initial Unbalance of the Rotor

  The dynamic unbalance of the rotor is generated during the rotor processing. From the perspective of the rotor processing technology, analyze the main reasons for the rotor dynamic unbalance, and what are the processes and process control measures that have a significant impact on the initial ro ...

  Read more
• 

  Vacuum Cleaner Impeller Balancing Machine

  The working principle of Hangzhou Jizhi Mechatronic Co., Ltd vacuum cleaner impeller balancing machine is to measure the unbalanced position of the impeller through the whole dynamic balancing machine. Then the weight of a certain position is too much or too little, so that the centrifugal force ...

  Read more
• 

  How to do I.C.Calibration on JIZHI Dynamic Balancing Machine

  Please make sure that the rotate speed of test stations is stable around 1600~2100(rpm) and the vibration reading range is not more than 10 before calibrating the I.C.   Step1: Check the armature parameters Get into the armature parameter page. Check the following parameters. 1. Radius ...

  Read more
• 

  Static balancing or dynamic balancing

  In previous article, we talked about the difference between static balancing and dynamic balancing. Here comes a new problem: how to choose between static balancing machine and dynamic balancing machine? According to GB9239 criterion, for rigid rotor, If the supporting distance of the plate s ...

  Read more
• 

  Dynamic Balancing Accuracy Grade

  The part that rotates around the axis in the machine is called the rotor of the machine. If a rotor has a uniform mass distribution and is manufactured and installed properly, the operation is balanced. Ideally, the pressure on the bearing, other than gravity, is the same as when the rotor is no ...

  Read more