Technical Specifications
| Type | BWXDT-2W-A |
| Main compinents | Cylinder：SMCSever motor：MITSUBISHI |
| Sensor：KETENCEBAUMER | |
| Touch pan：KEYENCE | |
| Control PLC：KEYENCE | |
| Rotor range | weiight:＜1kg |
| Rotor diameter：50~130mm Shaft length:＜200mm | |
| The length of core: 30~90mm | |
| Measuring speed | 1380~2100rpm |
| Balance correction method | periphery sweep mill |
| power | 3-PHASE AC380V |
| Working air pressure | 0.4~0.6MPA |
| Cycle time | 35S-45S*Depending on the workpiece, there will be differences |
| Residual volume | 80mg-300mg”Depending on the workpiece, there will be differences |
| (length*heightxdepth) Volume | 850mmX1970mmX1500mm |
| Machine weight | 1.5T |
| Consumption | 1.5kw |
| Cleaner consumotion | 1.5kw |
Product Features
- The measuring station has both primary and secondary measurement
- The function is to measure the initial unbalance of the rotor, as the basis of drilling weight removal, zero position after testing, and measure the residual unbalance after weight removal to judge whether the rotor is qualified
- The initial test station is a vertical balance testing machine
- The measuring table drives the belt to rotate through the servo motor, thus driving the rotor to rotate
- With high-precision positioning sensor, ensure the precision and stability of the measured angle of the imbalance
- The floating table type measuring station cooperates with the vibration sensor produced by our company, which has the national patent, and ensures the accuracy and stability of the unbalance measured
Application
This product is a mechatronics engineering equipment, with PLC as the main control computer, to complete the relevant calculation and action control of each station, with touch screen as the human-machine interface, to set parameters and operation of the machine
Product media
